HANSATECH FMS1 Manual Download

Page: 47 / 86

Section 2: Software Installation, System Operation, Data Handling

The Print graph function prints all of the graphics information which is displayed within the

boundary of the data recording area plus event markers whilst the Print params functions outputs

each of the parameters in a single column in descending order as they were recorded.

The size of the print output can also be adjusted to fit different areas on the page with the Set

printer page feature (Figure 2-27).

Fig. 2-27

. Set printer page dialogue box.

The default settings give minimal margins. The print area may be changed by altering the height

and width settings with a constant height / width aspect ratio maintained by ticking the “Auto

Height” option box. The printer page settings apply to output from both Print graph and Print

params functions.

3.6

Instrument Programming Via User-Defined Scripts

The FMS has been developed in parallel with Hansatech Scripting Language (HSL). The latter

consists of a simple, yet extremely versatile, method for pre-programming a maximum of six user-

defined control event / measurement sequences (referred to as protocols or scripts) into the

instrument. Once programmed the protocols are available for operation by a single-key press

under “Local mode” outside of the laboratory or from the Windows software. The Script function

on the “drop-down” menu allows access to the Script Editor for creation / editing of protocols, the

Script Recorder which logs commands used in “PC mode” to automatically generate a script and

the script Run command for Windows operation.

3.6.1

The Script Recorder

The principles behind the Script Recorder are very similar to those of “Macro Record” functions

found in spreadsheet packages. When active the recorder logs the sequence and timing of every

command that the user issues during the experiment and automatically creates a script which

during play-back precisely replicates the original series and timing of commands that were issued.

Summary of Contents for FMS1























































































Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands

HANSATECH FMS1, Manual

Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands