20
TURN ON THE APPLIANCE AND SELECT PROGRAMME
1. A cycle that is underway can only be modified if it has only been running for a short time. Otherwise,
the detergent may have already been released, and the appliance may have already drained the wash
water. If this is the case, the detergent dispenser must be refilled (see the section entitled “Loading the
Detergent“).
2. Press the Start/Pause button the machine will be in standby state, press the programbutton more
than 3s then you can change the program to the desired cycle setting (see the section entitled “Starting
a wash cycle. . .”).
WARNING!
If you open the door during a wash cycle, the machine will pause. The program light will stop
blinking and the buzzer will mooing every minute unless you close the door. After you close the
door, the machine will keep on working after 10 seconds.
If your model has broken remember function, the machine will go on to finish the selected
program after the power cut.
Change programme
2
1
