15
PREPARE THE APPLIANCE FOR OPERATION
Water hard-
ness
German de-
grees [dH]
French de-
grees [dF]
British degrees
[dE]
Water hard-
ness level
indicator
Salt consump-
tion [g/cycle]
1
0~5
0~9
0~6
H1
0
2
6-11
10-20
7-14
H2
9
3
12-17
21-30
15-21
H3
12
4
18-22
31-40
22-28
H4
20
5
23-34
41-60
29-42
H5
30
6
35-55
61-98
43-69
H6
60
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use filters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 4.
Water hardness table
The use of detergents
Use a detergent for domestic dishwashers.
On the market you can find detergent in
-
tended for dishwashers in the form of pow-
der, gel and tablets. The detergent must be
placed in the dispenser before starting the
dishwasher. Store detergent in a cool and
dry place, out of reach of children.
Do not overfill the detergent dispenser,
otherwise the detergent may not dissolve
completely and leave streaks on the
dishes.
If you need more information on the deter-
gent used, please contact the manufac-
turer directly.
i
Open the door, turn on the appliance using
the On/Off button.
Press the Program button for more than 5
seconds to start the water softener set
model within 60seconds after the appli-
ance was switched on( The Salt and
Rinse aid warning lights will be on periodi-
cally when it get in the set model);
Press the Program button to select the
proper set according to your local environ-
ment, the sets will change in the following
sequence: H1->H2->H3->H4->H5->H6;
Press the Power button to end the set up
model.
1
2
