Hansa WHP 6100 LSC, Operating Instructions Manual, Page: 22 / 41

22
When you select Time Remaining, the display will show time remaining until the
end of the programme . With this option the user selects the time remaining
until the end of the programme and the washing machine will fit the entire wash
cycle in this time entered by the user.
Press the button to set the time remaining until wash cycle must end.
3
Time Remaining button
Choose the appropriate wash programme as required, depending on the soil
level, and type and amount of laundry loaded, which ensures better results
and more effective washing. Once the wash programme is started, turning the
programme selector knob to another position is indicated by a beep, however it
does not change the previously selected programme.
Large and easy to read display provides instant access to information about
each programme. During appliance operation the display shows the approximate
remaining wash time and (flashes when you can still pause the programme
and add laundry). The display also shows these symbols: door locked , Child
Lock , Wi-FI (*) , steam (*), Opti-dose , spin, programme symbols
, soil level and options (extra rinse / pre-wash
), rapid wash . The displayed time is an estimate and may differ from
actual wash cycle time, depending on temperature, water pressure, load size,
quantity of washing powder used etc. The time is automatically updated during
wash cycle. Displaying the same time for an extended period or abrupt changes
are normal.
Washing machines with LCD display also show the maximum load for the
programme selected with programme selector knob.
For a programme with full load the FUL message is displayed for 5 seconds.
Then programme time is displayed. For a programme with half a load the HLF
message is displayed for 5 seconds. Then programme time is displayed. For
other programmes the maximum load weight [kg] is displayed for 5 seconds.
Then programme time is displayed.
1
2
Programme selector dial
Display
This button allows the washing temperature to be set in different
programmes. Press this button to display water temperature settings
available for a given programme or an option for washing in cold water (no
heating). Depending on the selected programme, the display will show the
following settings: - - °C (cold water), 20°C, 30°C, 40°C, 60°C, 90°C.
4
Temperature selector button
* Available on selected models