34
OPERATION
Induction cooking zone operation principle
Electric oscillator powers a coil placed inside the appliance.
This coil produces a magnetic field, which induces eddy cur
-
rents in the pot, when it is placed on the hob.
These currents make the pot real transmitters of heat, while
the hob glass surface remains cool.
Before using the appliance for the first time
● thoroughly clean your induction hob first. The induction hob should be treated with the
same care as a glass surface.
● switch on the ventilation in the room or open a window, as the appliance could emit an
unpleasant smell during first use.
● operate the appliance while observing all safety guidelines.
This requires the use of pots whose base is ferromagnetic, in other words susceptible to
magnetic fields.
Overall, induction technology is characterized by two advantages:
●
the heat is only emitted by the pot and its use is maximised,
●
there is no thermal inertia, since the cooking starts immediately when the pot is placed on
the hob and ends once it is removed.
The protective device:
If the hob has been installed correctly and is used properly, any protective devices are rarely
required.
Fan:
protects and cools controls and power components. It can operate at two different
speeds and is activated automatically. Fan may runs when the cooking zones are off until
the electronic system is sufficiently cooled.
Temperature sensor:
Temperature of electronic circuits is continuously monitored by a
temperature sensor. If temperature is raised beyond a safe level, this protection system will
reduce cooking zone heat setting or shut down the cooking zones adjacent to the overheated
electronic circuits.
Pan detection:
allows the hob to detect pans placed on a cooking zone. Small objects placed
on the cooking zone (eg, spoon, knife, ring ...) will not be recognised as pans and the hob
will not operate.
