3
Assembly see page 4
Final assembly
(see page 8)
extension (article number 96370000) order
as an extra
Special accessories
Spare parts
(see page 7)
Dimensions
(see page 6)
Do not use silicone containing acetic acid!
Symbol description
Assembly
(see page 5)
1. Plaster in the installed Trio, in case of pre-wall
installation cover the Trio with a panel.
After the plastered wall surface is dry, seal the gap
between wall and plastic sleeve of the flush valve
with silicone (free from acetic acid!).
2. Apply PCI-Lastogum or similar sealing compound
on the wall in accordance with manufacturers
indications.
3. Put gasket over the plastic sleeve of the Quattro
four-way-diverter.
Important! The gasket is not suitable for
hot glue.
If the Trio Stop should be hot glued, please take
care that it is not damaged.
6
Safety Notes
6
Gloves should be worn during installation to prevent
crushing and cutting injuries.
6
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms.
• The plumbing codes applicable in the respective
countries must be oberserved.
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The fittings must be mounted in an insulated manner
and with sound insulation.
Installation example
(see page 31)
English