Hans Grohe Talis E 33400000, Assembly Instructions Manual

Page: 16 / 174

4
Important! The fitting must be installed, flushed
and tested after the valid norms!
Assembly
1
Flush through the supply pipes.
2 Mount the ball S - unions.
3 Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
33400000/33401/33453000: The flow is changed
from bath to shower function by pulling the knob
at the upper side of the spout. After shutting off
the water flow, the mixer returns automatically to
the bath function.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5
MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Centre distance: 150 ± 16 mm
Connections G ½": cold right - hot left
Rate of flow: ca. 22 l/min 0,3 MPa
anti-pollution function
To adjust the hot water limiter on single lever
mixers, please see page 6.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Important!
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once a
year).
Spare parts see page 3
1 handle
33091000
1.1 screw cover 94191000
2 flange 94192000
3 nut 94194000
4 cartridge cpl. 92730000
5 flange 94135000
6 S-union 94140000
7 aerator cpl. 13914000
8 selector assy 94077000
9 diverter knob 94078000
10 non return valve 94074000
11 hose connection 96044000
English