4
Connect the supply hoses
:
use 3/8” compression fittings (not
included) to connect the hot and cold
supply hoses to the stops. Use two
wrenches, as shown in the diagram,
to prevent the hoses from twisting.
Install the hose weight:
proper po-
sitioning of the hose weight insures that
the hose will retract smoothly.
Install the hose weight to the handspray
hose. Pull the hose out and guide it
back into position. If it does not retract
smoothly, or the sprayhead does not
stay in place when resting in the spout,
reposition the weight.
Turn on the water and check all connec-
tions for leaks.
User instructions
Pivot the handle up to turn the water on, down to turn the water off. Pivot the
handle to the right for cooler water, to the left for hot water.
If the flow of water diminishes, remove
and clean the hose filter screen.
