3
PorterE Handshower Holder
with Outlet
27508XXX
1
2
Installation:
Install a ½ male nipple, extending 5/8
outside the surface of the finished wall.
Seal the wall around the nipple with a
compatible, non-staining, waterproof
sealant. Wrap the threads on the nipple
with a good quality plumbers thread
tape. Screw the PorterE to the nipple.
3
Use the provided 4 mm hex wrench to
tighten the set screw.
IMPORTANT: Swivel the pivot ball as
shown in the picture. Slide the cover
over the PorterE.
