Assembly see page 5
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
The fitting must be installed, flushed and tested after
the valid norms.
If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous
flow heaters if the flow pressure is at least 0,15 MPa.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 – 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.:
65°C
anti-pollution function
•
•
•
English
Symbol description
Do not use silicone containing acetic acid!
Dimensions
(see page 9)
Flow diagram
(see page 9)
with EcoSmart®
without EcoSmart®
Spare parts
(see page 11)
Operation
(see page 10)
Cleaning recommendation /
Warranty
(see page 13)
Special accessories
Installation kit order as an extra
3
Summary of Contents for Metropol E 14033008
