Hans Grohe Metropol 14410 Series, Manual

Page: 6 / 28

6
Assembly
1. Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
Large differences in pressure between the hot and
cold water supply should be balanced.
Operation
The mixer is actuated by lifting the lever head.
Swivel to the left = hot water, swivel to the right =
cold water.
14410XXX: The flow is changed from bath to
shower function by pulling the knop at the upper
side of the spout. After shutting off the water flow,
the mixer returns automatically to the bath function.
Technical Data
Operating pressure: max. 10 bars
Recommended operating pressure: 1 - 5 bars
Test pressure: 16 bars
Hot water temperature: max. 80° C
Recommended hot water temp.: 65° C
Centre distance: 150 ± 16 mm
Connections G ½": cold right - hot left
Rate of flow 3 bares: approx. 22 l/min
Back flow and vacuum breaker
English
To adjust the hot water limiter on single lever mixers,
please see page 14.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
Spare parts
1 handle 14092XXX
1.1 screw cover 96338000
2 flange 94192XXX
3 nut 94194000
4 cartridge cpl. 92730000
5 escutcheon 94135XXX
6 S - unions 94140000
7 aerator cpl. 13956000
aerator cpl. gold plated 13956990
8 selector 94077000
9 diverter knob 94078XXX
10 non return valve 94074000
11 noise reduction 96429000
XXX = Colors
000 chrome plated
090 chrome plated/gold plated
880 satin chrome
Fa u lt Ca u se Re m e d y
Insufficient water -
-
-
Shower filter seal dirty
Filters dirty
N on return ralve didn' t move
back
-
-
-
Clean filter seal be-tween
shower and hose
Clean the fil-ter/ exchange filter
Exchange non return valves
Mixer stiff - Cartridge defective - Exchange cartridge
Mixer dripping - Cartridge defective
Sedimentation
- Exchange cartridge
Hot water temperature too low - Hot water limiter incor-rectly set - Set hot water limiter
Instantaneous heater didn' t
work -
-
-
Flow limiter in handshower isn' t
removed
Filter are dirty
N on return ralve didn' t move
back
-
-
-
Remove flow limiter
Clean the fil-ter/ exchange filter
Exchange non return valves