background image

6

English

Assembly
The fitting must be installed, flushed and

tested after the valid norms!

1. Flush through the supply pipes.

2. Place the mixer including the sealing washer in

position on the basin / bidet.

3. Slip the fixation piece including the washer

over the threaded pins and tighten the nuts.

4. Connect the supply pipes to the isolation valves;

cold right -  hot left.

5. 31050000/31052000/31055000/

31252000/31252000:

Connect the pull rod to the pop-up waste.

The hot and cold water supply's should be of equal

pressures.

Operation

The mixer is activated by lifting the lever handle.

Move to the left = hot water,

move to the right = cold water.

Technical Data
This mixer series-produced with

waterdimmer

®

 (flow limiter)

Rate of flow with waterdimmer:

7 l/min 3 bars

Rate of flow without waterdimmer:

14 l/min 3 bars

Operating pressure:

max. 10 bars

Recommended operating pressure:

1 - 5 bars

Test pressure:

16 bars

Hot water temperature: max:

max. 80° C

Recommended hot water temp.:

65° C

Test certificate 31050000/31055000: WRAS

0202032

Test certificate 31250000:

WRAS

0202033

Hansgrohe single lever mixers can be used

together with hydraulically and thermically

controlled continuous flow heaters if the flow

pressure is at least 1.5 bars.

If the continuous water heater causes any problems

or there is not enough flow of water, the

waterdimmer

®

 (7a) located behind the aerator

must be removed.

To adjust the hot water limiter on single lever

mixers, please see page 14.

No adjustment is necessary when using a

continuous flow water heater.

Spare parts

 (see page 3)

1

handle

31092000

1.1 screw cover

96338000

2

flange

94192000

3

nut

94194000

4

cartridge cpl.

92730000

5

locking screw for handle

96059000

6

seal

95008000

7

aerator cpl.

13912000

8

pop up rod

92620000

8.1 diverter knob

94066000

8.2 pull rod

94067000

9

fixing set

96016000

10 connection hose 450 mm

95001000

31050000/31055000/

31056000/31250000/

31256000

11 connection hose 450 mm

97206000

31052000/31252000

Special accessories

X

special tool set

58085000

(not part of delivery)

Summary of Contents for Metris 31050000


















Reviews: