6
Safety Notes
6
Gloves should be worn during installation to prevent
crushing and cutting injuries.
6
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms.
• If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
• Hansgrohe mixers can be used together with hydrauli-
cally and thermically controlled continuous flow heat-
ers if the flow pressure is at least 0,15 MPa.
Technical Data
This mixer series-produced with EcoSmart
®
(flow
limiter)
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 – 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max.. 80°C
Recommended hot water temp.:
65°C
English
Spare parts
(see page 9)
Assembly see page 4
Dimensions
(see page 7)
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
To adjust the hot water limiter on single lever
mixers, please see page 6. No adjustment
is necessary when using a continuous flow
water heater.
Symbol description
Flow diagram
(see page 7)
with EcoSmart
®
without EcoSmart
®
Do not use silicone containing acetic acid!
Operation
(see page 8)
Cleaning
see enclosed brochure
3
Summary of Contents for Focus 31607009
