Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The plumbing codes applicable in the respective
countries must be oberserved.
• The drain valve must only be used as intended. It is not
allowed to attach other objects to the drain valve, for
example a semi-pedestal.
• If you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
Pressure and tightness test
• The mixer connections must be tested of tightness after
installation.
Technical Data
Mixer with EcoSmart
®
(flow limiter, 5 l/min)
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar ≈ 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.:
60°C
Thermal disinfection:
max. 70°C / 4 min
The product is exclusively designed for drinking water!
English
Test certificate
(see page 9)
Cleaning
(see page 12)
Operation
(see page 10)
Hansgrohe recommends not to use
as drinking water the first half liter of
water drawn in the morning or after a
prolonged period of non-use.
After periods of prolonged non-use, but
at least every third day, the fittings must
be opened with the handle in hot and
cold position to prevent stagnation in the
connecting lines. Let the water run until
the water temperature is constant.
Assembly See Page 4
Dimensions
(see page 8)
Spare parts
(see page 11)
Installation putty (see page 5)
Adjustment
(see page 7)
To adjust the hot water limiter.
Symbol description
Flow diagram
(see page 9)
seal #98996000 (see page 4)
Special accessories
(order as an
extra)
2 (12)
