English
�
Safety Notes
�
Gloves should be worn during installation to prevent
crushing and cutting injuries.
�
The product may only be used for bathing, hygienic
and body cleaning purposes.
�
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from
using this product.
�
The hot and cold supplies must be of equal
pressures.
Installation Instructions
•
Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
•
The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
•
The plumbing codes applicable in the respective
countries must be observed.
Technical Data
•
To guarantee the smooth running of the thermostat, it
is necessary from time to time to turn the thermostat
from total hot to total cold.
Dimensions
(see page 70)
Flow diagram
(see page 71)
free flow
Outlet 1
Outlet 2
Spare parts
(see page 72)
XXX = Colors
000 = Chrome Plated
140 = Brushed Bronze
250 = Brushed Gold-Optic
330 = Polished Black Chrome
340 = Brushed Black Chrome
670 = Matt Black
700 = Matt White
800 = Stainless Steel Optic
950 = Brushed Brass
990 = Polished Gold-Optic
+
Special accessories
(see page 73)
order as an extra
•
extension 25 mm #13595000
•
Extension Set 22 mm (when wall is not deep
enough) #13593XXX, #13597XXX,
#15597XXX
•
levelling set 1° #95521000
Cleaning
(see page 69)
Operation
(see page 78)
Test certificate
(see page 80)
Operating pressure:
Recommended operating pressure:
Test pressure:
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Thermal disinfection:
max. 60°C
70°C / 4 min
•
The product is exclusively designed for drinking
water!
Symbol description
Do not use silicone containing acetic acid!
Safety Function
(see page 64)
The desired maximum temperature for example max.
42º C can be pre-set thanks to the safety function.
Adjustment
(see page 64)
After the installation, the output temperature of the
thermostat must be checked. A correction is necessary if
the temperature measured at the output differs from the
temperature set on the thermostat.
Maintenance
(see page 66)
•
The check valves must be checked regularly
according to EN 806-5 in accordance with national
or regional regulations (at least once a year).
6
Summary of Contents for Ecostat E 15708 Series
