Hans Grohe AXOR Uno 38113000, Instructions For Use/Assembly Instructions, Page: 4 / 52

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pressu-
res.
Installation Instructions
The fitting must be installed, flushed and tested after
the valid norms.
If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
Hansgrohe mixers can be used together with hydrau-
lically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
Technical Data
This mixer series-produced with EcoSmart ® (flow
limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C




•
•
•
English
Test certificate
(see page 35)
Special accessories
Installation kit order as an extra
Assembly see page 31
Flow diagram
(see page 33)

with EcoSmart
®

without EcoSmart
®
Dimensions (see page 33)
Operation
(see page 32)
Cleaning
Cleaning recommendations, see enclosed
brochure.
Do not use silicone containing acetic acid!
Symbol description
Spare parts (see page 34)