Assembly see page 60
Special accessories
With maximum mounting depth of the
basic set of 1.0 cm between upper border
of bath tub and lower border mixer,an
optional extension adapter can be obtained
seperately (article number 97686000) from
Hansgrohe should the distance be more.
Test certificate
(see page 64)
Cleaning
(see page67)
and enclosed brochure
Operation
(see page 65)
Spare parts
(see page 70)
Flow diagram
(see page 64)
Dimensions
(see page 62)
Maintenance non return valve
(see page 66)
The non return valves must be checked
regularly according to DIN EN 1717
in accordance with national or regional
regulations (at least once a year).
Adjustment
To adjust the hot water limiter on single lever
mixers, please see page 61. No adjustment
is necessary when using a continuous flow
water heater.
Do not use silicone containing acetic acid!
Symbol description
6
Safety Notes
6
Gloves should be worn during installation to prevent
crushing and cutting injuries.
6
Children as well as adults with physical, mental and/
or sensoric impairments must not use this shower
system without proper supervision. Persons under
the influence of alcohol or drugs are prohibited from
using this shower system.
6
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6
Do not allow the streams of the shower touch
sensitive body parts (such as your eyes). An
adequate distance must be kept between the shower
and you.
6
The product may not be used as a holding handle. A
separate handle must be installed.
6
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms!
• The mesh washer must be insert to protect the
overhead shower against incoming dirt by pipework.
Incoming dirt leads to defects or/and can damage
parts of the shower; such caused faults voids all
liability and guarantee claims.
• Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous
flow heaters if the flow pressure is at least 0,15 MPa.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 – 0,5MPa
Test pressure:
1,6MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.:
65°C
anti-pollution function
English
6
Summary of Contents for Axor Massaud 18450000
