5
Rough-in Installation Instructions
Install the transfer valve
Install the y-connector and seal on the bottom of the transfer
valve.
Connect the hoses to the y-connector.
Connect the elbow to the outlet on the transfer valve. The
arrow on the elbow connector indicates the direction of the
water flow. It should point downward.
Connect the spray hose to the elbow.
Push the transfer valve, nylon washer, and one of the china
seals (tapered side up) through the transfer valve hole.
Install the second china seal, tapered side down.
Install the mounting nut on the transfer valve. It should rest
on the mounting surface.
Make sure that the transfer valve
stands straight.
Install the spray assembly
Position the spray and sealing washer in the hole in the bidet.
Install the washer and mounting nut.
Connect the spray hose to the spray.
Do not to twist or kink the hose.
