3
Assembly see page 5
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!
The shower may only be used for bathing, hygiene
and body cleaning purposes.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply the
product and has no weak points.
• The product is not designed to be used with steam
baths!
English
Fault
Cause
Remedy
Head shower extremely leaky
- Head shower soiled / scaled
- Clean / descale head shower
see page 8
Spare parts
(see page 7)
Flow diagram
(see page 4)
Do not use silicone containing acetic acid!
Symbol description
Cleaning
(see page 10)
Dimensions
(see page 4)
Technical Data
Operating pressure:
max. 0,6 MPa
Recommended operating pressure:
0,3 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 60°C
Thermal disinfection:
max. 70°C / 4 min
The product is exclusively designed for drinking water!
Summary of Contents for Axor 460/300 1jet 35278007
Page 1: ...460 300 1jet 35278007 ZH 用户手册 组装说明 2 EN Instructions for use assembly instructions 3 ...
Page 5: ...5 Montage 1 3 5 2 4 6 1 1 2 2 ...
Page 10: ...10 Reinigung 20 mm Reinigung 1 3 2 SW 2 mm 4 kg 92686000 92686000 1 2 3 4 5 ...
Page 11: ...11 Reinigung 0 5 Nm 1 1 2 2 SW 2 mm 1 Nm 6 7 8 9 10 11 ...
