Hans Grohe AXOR 460/300 1jet 35277 7 Series, Instructions For Use And Assembly Instructions

Page: 3 / 20

0 3
A S S E M B L Y (see page 10)
EN
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!
The shower may only be used for bathing, hygiene and
body cleaning purposes.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective
countries must be observed.
⁄ During installation of the product by qualified trained
personnel, make sure that the entire fastening surface is
even and smooth (no protruding seams or tile offset),
that the finish of the wall is suitable to apply the product
and has no weak points.
⁄ The product is not designed to be used with steam
baths!
T E C H N I C A L D A T A
Operating pressure:
max. 0,6 MPa
Recommended operating pressure: 0,15 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C ⁄ 4 min
The product is exclusively designed for drinking water!
S Y M B O L D E S C R I P T I O N
Do not use silicone containing acetic acid!
D I M E N S I O N S (see page 19)
F L O W D I A G R A M (see page 04)
S P A R E P A R T S (see page 16)
XX = Colors
00 = Chrome Plated
34 = Brushed Black Chrome
99 = Polished Gold-Optic
S P E C I A L A C C E S S O R I E S (order as an
extra)
extension #35288XX7 (see page 16)
C L E A N I N G (see page 12)
I N S T A L L A T I O N E X A M P L E (see page
04)
i
F A U L T C A U S E R E M E D Y
⁄ Head shower extremely leaky ⁄ Head shower soiled ⁄ scaled ⁄ Clean ⁄ descale head shower (see
page 12)