Hans Grohe 10452180, Instructions For Use And Assembly Instructions

Page: 4 / 68

0 4
A S S E M B L Y B A T H - S H O W E R M I X E R (see page 37)
A S S E M B L Y B A T H S P O U T (see page 33)
A S S E M B L Y B A T H - S H O W E R M I X E R ⁄ B A S I N M I X E R
(see page 33)
EN
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pressures.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective
countries must be observed.
⁄ The basic set must be sealed in by the customer.
T E C H N I C A L D A T A
This mixer series-produced with EcoSmart
® (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C ⁄ 4 min
The product is exclusively designed for drinking water!
S Y M B O L D E S C R I P T I O N
Do not use silicone containing acetic acid!
D I M E N S I O N S (see page 32)
Freestanding tub with outside covering.
(see page 39)
*< min. 30 = extension 60 mm (#97686000)
S P A R E P A R T S (see page 64)
S P E C I A L A C C E S S O R I E S
(order as an extra)
⁄ sealing foil #96441000 (see page 64)
F I N I S H S E T (see page 39)
T E S T C E R T I F I C A T E (see page 32)
All manuals and user guides at all-guides.com