background image

 

ALL the connections. NEVER USE A FLAME TO CHECK FOR GAS LEAKS! 

 

Step5 

 

10. Stick the conversion label on the rating plate as shown in Figure 5.

 

Metal Rating Plate

 

 

1.

 

 

2.

 

 

3.

 

 

4.

 

 

5.

 

 

6.

 

 

7.

 

 

 

Figure 1

7

                            Conversion Label 

 

                           

 

MAINTENANCE 

 

The flames should look like those in Figure 6. To clean the burner,

 

use a soft brush after the burner has cooled completely. Never 
use a vacuum cleaner on the burner. It is recommended to store 
the fire pit indoors during winter if it will be subjected to freezing 
temperatures. The LP cylinder must be disconnected and 
removed from the appliance before the appliance can be stored 
indoors.    

 

 

 

 

 

 

 

 

 

 

 

                                                                                               

                                                                                                                    Figure 6

 

 

 

 

Serial 

Number 

_________________ 

   Model 

Number: 

WT17YL3 

CAUTION: 

The gas pressure regulator provided with this appliance must be used. This regulator is set for an outlet pressure of   

 
 
 
 

Minimum clearance from combustible constructions: Sides: 24 in.609 mm. Top 72 in. 1828 mm.

 

FOR OUTDOOR USE ONLY. 

If stored indoors, detach and leave cylinder outdoors. 

This appliance has been converted to use Natural Gas. Input 30,000 Btu/hr. 

Max Gas Supply Pressure 7 inch w.c. (1.74 kPa) Min. Gas Supply Pressure 5 inch w.c. (1.24 kPa) 

Figure 5

Conversion Label

 

Page ̐

11

Summary of Contents for WT17YL3 ARE13600

















Reviews: