background image

 

ASSEMBLY INSTRUCTIONS 

   

 

 

 

 

 

 

 

 

 

 

 

 

     WARNING 

Do not store or use gasoline or other 
flammable vapors and liquids in the 
vicinity of this or any other appliance. 
An LP-cylinder not connected for use 
shall not be stored in the vicinity of this 
or any other appliance. 

 

 

DANGER

 

If you smell gas: 
1.    Shut off gas to the appliance. 
2.    Extinguish any open flame. 
3.    If odor continues, keep away from       
 

the appliance and immediately call 

 

your gas supplier or fire department.

WARNING:  

USE FACTORY APPROVED 
REPLACEMENT PARTS AND 
ACCESSORIES ONLY. USE 
OF UNAPPROVED PART OR 
ACCESSORIES CAN VOID 
THE WARRANTY ON THIS 
PRODUCT AND RESULT IN 
AHAZARDOUS CONDITION.   
PLEASE CONTACT US FOR 
INFORMATION REGARDING 
REPLACEMNT 
HOSES,THERMOCOUPLES,
ELECTRODES,IGNITION 
MODULES,LAVAROCKS,LO
GS, FIRE ICE, ETC.

 

 

WARNING

:

 

Improper installation, adjustment alteration, 
service or maintenance can cause injury or 
property damage. Read the installation, 
operating and maintenance instructions 
thoroughly before installing or servicing this 
equipment.

 

FOR USE WITH 20LB (9KG) PROPANE 

CYLINDER WITH TYPE 1 CONNECTION OR FOR 

USE WITH NATURAL GAS AFTER CONVERSION 

KIT IS INSTALLED (MUST BE PROFESSIONALLY 

INSTALLED) ALSO THE LP REGULATOR MUST 

BE SUPPLIED BY THE MANUFACTURER. 

Dec 2014

Installer: Leave these instructions with consumer.

 

Consumer: Keep these instructions for future reference

.

 

         

WARNING: For Outdoor Use Only

 

Questions, Problems, Missing Parts? Before returning to 

your retailer, call our customer service department in the 

US and Canada at 1-800-416-3511, Monday-Friday, 9 a.m.– 

5 p.m

.

 Eastern Time. 

This appliance can produce carbon 

monoxide which has no odor.   
Using it in an enclosed space can kill 

you.   
Never use this appliance in an enclosed 

space such as a camper, tent, car or 

home. 

 

DANGER

        

CARBON MONOXIDE HAZARD

 

 

 

CSA Model 99000

 

ARL00100

Summary of Contents for TRADITIONS2PCFP


















Reviews: