Assembly
1
Attaching the support ring
□
Place the table leg
s
(C) on a soft, flat non-
abrasi
v
e surface.
□
Attach the support ring (B) to the table legs (C) using
washers (BB) and hex bolts (AA). Do not fully
tight
en
the bolts.
2
Attaching the table legs
□
Place the table top (A) on a soft, flat non-abrasi
v
e
surface.
□
Attach the table legs (C) to the table top (A) using
washers (BB) and hex bolts (AA).
□
Ensure all the bolts are aligned and assembled
correctly. Tighten all the bolts with
the
wrench
(DD). Attach all the hex bolt caps (CC).
3
□
Turn the table over and set it down on its legs.
□
The table is now ready for use.
Page 6 of 6
