Reminder Function:
1.When the height of the device is incorrect or an error code appears, the device needs to
be reset and corrected. At the same time, press and hold the "3" and "4" keys for three
seconds to enter this function.
2. After entering the reset function, the display shows "RST". At this time, press and hold
the "▼" button to reset the device. When the desktop drops to the lowest height, it starts
to rebound and move upwards until it displays "bot", which means the reset is complete.
●
29V DC power supply function:
1.When the standing desk is not in the reset state, after 30s from running to stopping,
the 29V DC power supply function will be turned on, and the 2pin at the back of the control
box will output a DC 29V voltage.
●
Anti-collision sensitivity adjustment - optional features:
1.Simultaneously press the "▲" button and "▼" button for three seconds to switch the
sensitivity, one operation to switch one gear, divided into 4 gears, A-0, A-1, A-2, A-3
2.The display shows “ ” to close the anti-collision function; the display shows “ ” high
sensitivity; the display shows “ ” Medium sensitivity; the display shows “ ” Low
sensitivity. (Factory default A-2)
3.When the desk rises or falls, it will rebound immediately when encountering obstacles,
which plays a protective role.
●
Code processing:
1.Reset function definition, the LED display shows “ ”or “ ”, at this time, press and
hold the “▼” button to start the device reset, when the desktop drops to the lowest height,
it starts to rebound and run upwards until it displays "bot", that is, the reset is complete.
2.If "E01" or "E02" appears, please let the table rest for more than 18 minutes before it can
be used normally.
●
3.If other codes appear and long press the "▼" button does not respond, please confirm
that the connection line is not damaged and the connection is normal, and the power is
cut for more than 10 seconds, and the power is turned on again, the display “ ”or “ ”,
then long press "▼ "Button to reset.
4.If you perform the above operations, the desk still does not operate normally, please
contact customer service.
