Assembly Steps:
Note: Do not fully tighten bolts until assembly is completed and alignment is correct.
Step 1. Carefully place the table top (A) upside down on a non-abrasive surface.
Step 2. Assemble the table legs (B) to the table top (A) with bolts (AA) and washer (CC)
as shown in figure 1.
Figure 1
Step 3. Loosely attach the support tube (C) to the table leg (B) and table top (A) with bolts (BB)
and washer (CC) as shown in figure 2.
Step 4. Check the alignment and adjust if necessary. Once the alignment is correct, tighten all
bolts with wrench (EE) . Cover all bolts with bolt caps(DD).
Figure 2
Page 6 of 7
