IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT
Step 1:
Carefully unpack and identify all parts packed in
the carton against the parts list. Remove all protective materials. If you are missing any parts or are unsure how to
proceed with assembly, call our customer service center immediately at 1-800-416-3511.
Do not attempt to assemble glider if any parts are missing or damaged.
Assemble furniture on a smooth, non-abrasive surface.
Step 2:
by using two 5/16"x40 mm bolts and washers as shown in
Fig.1
. Guide the bolts through holes in back frame, into
pre-drilled holes in the
.
Hand tighten only.
and back frame by using four 5/16"x25 mm bolts and
washers as shown in
Fig.2
.
Hand tighten only.
A
and seat frame by using two 5/16"x25 mm bolts and two 1/4"x40 mm bolts
and four washers as shown in
Fig.3
.
Hand tighten only.
Attach the back frame to right arm
right arm
Attach the seat frame to right arm
ttach the left arm to back
Step 3:
Attach the support frame assembly to one side of glider base/glider. Insert two bolts exactly as shown in
Fig.4
: throughØ15x4mm washers/armrest
frame/Ø15x6mm washers/glider bracket/Ø6.5x1.0mm washers/nuts.
Hand tighten only as some adjustments may be needed for proper alignment or
tension of the glider. Repeat on opposite side.
B
D
A
C
F
E
J
H
I
J
H
I
J
G
I
J
G
I
P
N
M
L
K
O
J
H
I
J
H
I
J
G
I
Fig.1
Fig.2
Fig.3
GLIDER BASE W/
GLIDER BRACKET
Fig.4
