background image

52

 

Situation

Solution

No picture and sound.

• Connect the power cord properly.
• Press the 

POWER

 button on the con-

trol panel or remote control.

• Press the 

SOURCE

 button to cycle 

through connected video sources.

• Press the 

Channel up 

or 

Channel 

down 

button to switch to other TV 

stations.

• Check the TV/CATV OSD settings. 

See “TV/CATV” on page 45.

• Make sure all cables are connected 

properly.

No picture, or poor picture, 
sound is OK.

• Check the antenna and cable connec-

tions.

• Adjust the brightness in the OSD 

menus. See “Brightness” on page 32.

Picture is not in color.

• Adjust the saturation in the OSD 

menus. See “Saturation” on page 36.

Picture is OK, no sound.

• Press the 

Volume up 

button on the 

control panel or remote control.

• Make sure the MTS option is set to 

MAIN or MONO. 

One of the speakers has no 
sound.

• Adjust the balance in the OSD 

menus. See “Balance” on page 42.

Can’t receive some TV chan-
nels using cable TV.

• Try the Auto Program function in the 

OSD “TV Setting” menu. See “Auto 
Program” on page 47.

Want to reset TV settings.

• Use the Preset function in the OSD 

Picture and Audio menu. 

Troubleshooting

13

Summary of Contents for ST25-10A1


























































Reviews: