ENGLISH
21
PVR
SLEEP
FAV.
Time Shift Function
Allows you to record the TV program so that you won’t miss the favorite part even if you go
out. Before you use the function, connect a USB device to the TV first. For the first time, you
should do the disk setup for the USB device.
1
Switch the input source to DTV mode.
2
Press
to pause the picture and begin the time shift.
3
Press
to continue the program.
4
Press
to fast forward or press
to rewind the time
shift file.
5
Press
to quit the time shift function.
Notes:
Before you plug the USB device to TV, make sure you have backed up the data in the device to avoid unusual
•
performances make your important data lost.
We recommend you use a USB device with the free file size bigger than 1Gb and disk speed faster than 5.0M/
•
sec.
The bigger file size for the time shift, the longer you can record the program.
•
If changing channel in time shifting, a message prompts to let you select
•
Yes
or
No
. You can select
Yes
to exit
the time shift function and execute the channel change.
PVR (Personal Video Record)
This function allows you to record your favorite TV program to a USB device.
1
Plug a USB device to the USB connector on the TV.
2
Press the red button to start recording. A PVR mini panel appears on the screen to indicate
the recording progress.
n
Use
p
/
q
/
t
/
u
to adjust the recording duration.
n
Press the green button to stop recording manually. Otherwise, the recording will stop
automatically when the recording duration is complete.
n
The recorded file is saved into a PVR folder in
Media Center
>
Video
>
pvr
.
3
To watch the recorded program, exit the
PVR
mode first and switch to
USB
mode. Go to
Media Center
>
Video
and select the desired recorded file in the PVR folder. Press
OK
to
play.
Notes:
This function is only available for digital channels.
•
This function only supports USB device of FAT32 format.
•
Before you plug the USB device to the TV, make sure that you have backed up the data in the device to avoid
•
unusual performances that might cause data lost.
The bigger storage size of the USB device for PVR function, the longer you can record the program.
•
If you want to switch the channel or signal source during recording, it will prompt you whether to stop recording,
•
select
OK
if you want to save the recorded data. Then switch to a new channel or signal source.
The TV can not play files normally if the file parameters exceed the system limitations, the file format is not
•
supported, the file is damaged, or the file can not be decoded.
Do not unplug the USB device when the system is recording data or reading a file. This may cause system or
•
device malfunction.
