27
Switching Source Signals
Press the
SOURCE
button on the
remote control or the
TV
button on
the control panel to select the
incoming source signal.
The current source setting CH xx
appears on the top left corner of the
screen; TV or AV appears on the
bottom right corner of the screen.
Note:
The TV supports S-Video input in addition to normal video and audio sig-
nals. The TV detects the signal type automatically and gives priority to S-
video when two signals are detected at the same time. This auto detection
function is only available for AV2.
Adjusting the Volume
Press the
VOL UP
button to increase
the volume. Press the
VOL DOWN
button
to decrease the volume. The
volume level is displayed on the TV.
Press the
MUTE
button on the
remote control to turn the sound off.
The word “Mute” appears on the top
left corner of the screen and sound
is temporarily turned off.
Press the
MUTE
button on the
remote control or press
VOL UP
button or
VOL DOWN
button to
restore the original volume.
TV
TV/AV
Current source setting
TV
AV
CH 40
TV
Volume up
Volume
down
Mute
