![background image](http://html1.mh-extra.com/html/hannspree/lcd-tv/lcd-tv_safety-instructions_3654541020.webp)
16
2. Move the cursor to “Prog. No, “ and select the desired channel position with
◄►
.
3. Move the cursor to “System,“ and select the system according to your local area with
◄►
.
4. Move your cursor to “Search,” and search the detectable channels with
◄►
.
5. Move your cursor to “Fine Tune,” and adjust the picture with
◄►
.
6. Move to Store, then Store the instruction with
ENTER
.
Note:
The channel will be stored instead of the former program.
Name:
To enter a name for program with 0~9, +-. /, and A~Z.
Press
◄
or
►
to get into “Name.”
1. To enter a name:
Press red key (on the remote control) to edit a name for the channel.
Use
▲▼
to select the desired letter and use
◄►
to move the cursor to enter next letter. After the
desired name is entered, press blue key (OK) to confirm.
2. To Erase/ Add channels:
Use
▲▼
to select the desired channel.
Press yellow key to erase the channel or press green key to add it.
When using
PROG
▲▼
key, the channels you erased will be passed over. You may press green
key to add the erased channels or use Auto Scan function to re-present them.
3. To exchange one channel with another:
Press blue key to enter the function of “Sort,” and the following screen will show.
If you want to exchange channel 1 with channel 2:
Summary of Contents for LCD TV
Page 8: ...4 REMOTE CONTROL...