background image

User’s Manual

                                                                                                                   

            OSD[V6.1]

 

 

 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
 
 

FCC Class B Radio Frequency Interference Statement   

 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two 

conditions

(1) this device may not cause harmful interference

and (2) this device must accept any 

interference received, including interference that may cause undesired operations. 
 

CANADA 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing 
Equipment Regulation.   

Optional, depend on selected model

 

 
 

 

This device complies with requirement of EMC directive 2014/30/EU with regard to 
Electromagnetic Compatibility, and 2014/35/EU and 93/68/EEC with regard to Low Voltage 
directive. 

Optional, depend on selected model

 

 
Socket-outlet shall be near the equipment and shall be accessible. 
 
 
Bemerkung zu den Warenzeichen: 

      HANNspree -Produkte beinhalten High-Definition Multimedia   
Interface-(HDMI™) Technologie. 

HDMI, das HDMI-Logo und High-Definition Multimedia Interface sind Marken oder eingetragene 
Markenvon HDMI Licensing LLC in den Vereinigten Staaten und anderen Ländern. 

HS279PSB 
LCD Monitor 

(HSG1390) 

Summary of Contents for HS279PSB























Reviews: