User’s Manual
FRONT PANEL CONTROL
•
Power Button:
Press this button to switch ON/OFF of monitor’s power.
•
Power Indicator:
Green — Power On mode.
Orange — Power Saving mode.
•
MENU / RETURN:
Turn the OSD menu on/off or return to the previous menu.
•
Adjust
◄►
:
1. Adjust Preset Mode and Brightness when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
•
【
AUTO
】
Button:
《
Analog Input Models
》
1. The OSD menu is used as
《
confirmation
》
function during start-up.
2. The
「
Auto adjustment
」
function works only for VGA input. (The auto adjustment function is
used to optimize the
「
horizontal position
」
,
「
vertical position
」
,
「
clock
」
,and
「
phase
」
.)
•
【
AUTO
】
Button:
《
Digital Input Models
》
1. Press
【
AUTO
】
to enter Source selections. (Selections include DVI, etc. The actual selections
may very depending on the models. This function is only available in models with digital
inputs)
2. The OSD menu is used as
《
confirmation
》
function during start-up.
3. Press and hold this button more than 3 seconds will start
「
Auto Adjust
」
function when using
VGA input only. (The auto adjustment function is used to optimize the
「
horizontal position
」
,
「
vertical position
」
,
「
clock
」
,and
「
phase
」
.)
•
Hotkeys:
1. Restore Brightness and Contrast defaults:
To reset both the Brightness and Contrast to their default values, press the
【
◄
】
and
【
►
】
keys at the same time.
2. ASPECT RATIO:
Press
【
MENU
】
+
【
◄
】
key to change to
「
FULL MODE
」
or
「
FIT MODE
」
.
3. Change Resolution:
For similar screen display resolutions (see table below), the screen resolution can be changed by
pressing the
【
MENU
】
+
【
►
】
button to achieve the optimal display quality.
13
