27
Switching Source Signals
Press the
SOURCE
button on the
remote control or the
TV
button on the
control panel to select the incoming
source signal.
The current source setting CH xx
appears on the top left corner of the
screen; TV or AV appears on the bot-
tom right corner of the screen.
Note:
The TV supports S-Video input in addition to normal video and audio sig-
nals. The TV detects the signal type automatically and gives priority to S-
video when two signals are detected at the same time. This auto detection
function is only available for AV2.
Adjusting the Volume
Press the
VOL UP
button to increase the
volume. Press the
VOL DOWN
button
to
decrease the volume. The volume level
is displayed on the TV.
Press the
MUTE
button on the remote
control
to turn the sound off. The word
“Mute” appears on the top left corner of
the screen and sound is temporarily
turned off.
Press the
MUTE
button on the remote
control or press the
VOL UP
button or
the
VOL DOWN
button to restore the original volume.
M
TV
C H 4 0
A V
TV/AV
Current source setting
TV
M
TV
Volume up
Volume down
Mute
