39
English
7
Dissembling the stand base
1
Disconnect all the cables and cords from the TV to prevent breakage.
2
Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3
Squeeze the sides to release the retaining plastic tabs and pull the stand cover
off.
4
Remove the six (6) screws so that the stand base can be removed.
5
Gently remove the stand base.
Wall mounting the TV:
1
Purchase a VESA compatible wall bracket:
VESA 100 X 200, 6 holes, M4, 8mm, 20 kg.
2
Locate your ideal TV position on the wall.
3
Fix the wall bracket firmly on the wall.
4
Secure the TV to the bracket using the 6
mount holes on the back and center of the TV.
*Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask
a qualified service personnel about using an optional bracket to mount the TV to the wall.
Note:
•
Please read the instructions of your specific wall bracket to properly wall mount
the TV.
•
The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
•
The screws type required is metric: M4, 8 mm length.
•
The 25” TV stand base can be screwed on a table or a hard surface using the
hole on the back of the stand base.
( For reference only )
