HANNspree 23inch Liquid Crystal DisplayTelevision, User Manual

Page: 36 / 97

35
9
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 20 feet
(6 meters) from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at the TV.
Notes
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
Turning the TV On and Off
1
Press power on the remote control or on the control panel. The power
LED indicator on the front of the TV changes from red to green,
indicating that the power is on.
2
Press power again. The power LED changes from green to red,
indicating that the TV is off.
Selecting Channels
1
Press channel up to increase the channel number by one.
2
Press channel down to decrease the channel number by one.
3
Enter the specific channel number by pressing the number buttons on
the remote control. The channel number is displayed on the screen.
Switching Source Signals
Press source on the control panel repeatedly to select different sources.
Alternatively, press TV on the remote control to select the TV/CATV source,
press RGB to select the PC source, and press AV repeatedly to cycle
through AV1-AV5 sources.
The selected source – TV/CATV, PC, AV1, AV2, AV3, AV4 and AV5 –
appear on the top left corner of the screen in that order.