Hannlomax HX- 322CD, Instruction Manual, Page: 2 / 2

TURN ON AND TURN OFF THE UNIT
Press the
/
SOURCE button to turn on the unit.
Press and hold the
/
SOURCE button to turn off the unit.
RADIO OPERATION
1. After turn on the unit, press the
/
SOURCE button to select AM or FM mode.
2. DIGITAL TUNNING: Press the SKIP UP [ ] or SKIP DOWN [ ] button for
approx. 1 second, it will start to search the next radio station in the direction of the
search. The search operation simply finds stations with strong signals. Stations
with weak signal can only be tuned in manually.
3. MANUAL TUNNING: Press the SKIP UP [ ] or SKIP DOWN [ ] button step by
step to tune to the desired radio stations
4. Use the or VOLUME- button to adjust the volume.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM
reception, the unit has a built-in antenna, turn the whole unit for best reception.
For AM reception the signals are picked up through a built-in ferrite antenna. You may
have to orient the unit to obtain the best reception.
SAVING RADIO STATIONS IN THE MEMORY
1. Tune to the desired radio stations.
2. Press the
MODE/MEM/PROG button, the display will show ‘PXX’ and flashing,
where ‘XX’ is the next memory station number.
3. Press the SKIP UP [ ] or SKIP DOWN [ ] button to select desired preset radio
station.
4. Press the MODE/MEM/PROG button again to store the station in the memory.
5. Repeat step 1 to 4 to store more radio stations in the memory.
6. Up to maximum 10 AM and 10 FM radio stations can be stored in the memory.
TO SELECT A STORED RADIO STATION IN THE MEMORY
Press the STOP /M+[ ] button to skip to the next stored radio station.
CD OPERATION
1. After turn on the unit, press the
/
SOURCE button to select CD mode..
2. Insert a CD disc in the CD compartment and close the CD door, the unit will start
reading the disc and it will start playing automatically.
3. During playing, press the PLAY/PAUSE [ ] button to temporarily pause playing.
To resume, press the PLAY/PAUSE [ ] button again.
4. Press the STOP /M+[ ] button to stop playing the CD
5. Use the or VOLUME- button to adjust the volume.
-3-
Skip Mode
1. During play or pause mode, press the SKIP UP [ ] button to go to the next track.
2. During play or pause mode, press the SKIP DOWN [ ] button to go back to the
beginning of the track.
3. Press the SKIP DOWN [ ] button again will go back to the previous track.
Different Play Mode
In CD mode, press the MODE/MEM/PROG button repeatedly to select different kinds
of play mode with the following sequence.
Repeat One repeat the track being played (The display will show “
rEP .1 ”.)
Repeat All repeat all the tracks in the CD (The display will show “ rEP.A ”)
Normal play the tracks in sequence.
CD Programming
The programming should be done during STOP mode.
1. Press the
MODE/MEM/PROG button, the display will show “ P01” and flash.
2. Use the SKIP UP [ ] or SKIP DOWN [ ] button to select the desired track.
3. Press the MODE/MEM/PROG button again to store the selected track in the
memory, the display will show “ P02” and flash continuously.
4. Repeat steps 1 to 2 to store more tracks in the memory. You can store up to 20
tracks in the memory. The display will show “FULL” if the memory is full.
5. Press the PLAY/PAUSE [ ] button to start playing the disc in the programmed
order.
6. To stop playing, press the STOP /M+[ ] Button.
7. To cancel the programming list, press the STOP /M+ [ ] button and open the CD
compartment door.
BLUETOOTH OPERATION
1. After turn on the unit, press the SOURCE button to select the Bluetooth mode.
The display will show ‘ bt ’ and blink .
2. Turn on the Bluetooth of your Bluetooth device and search the boombox unit for
connection. Your Bluetooth device should find “ HX-322CD HANNLOMAX ”
(If password is needed for connection, please enter “0000”.)
3. When the connection is successful, the “ bt ” on the display will stop blinking.
4. Select and play the audio file though your Bluetooth device.
5. Press the
SKIP UP [ ] button to go to the next track
6. Press the SKIP DOWN [ ] button to go back to the previous track.
AUTO PAIRING
Once the unit paired with the Bluetooth device, it will automatically pair with that
device next time when you turn on the unit and that Bluetooth device.
-4-