AC OPERATION
Before operation, please make sure that the VOLTAGE selector on the unit is set to the voltage of
your local area. Unravel the AC power cord, insert one end into the AC socket on the set, and the
other end into a standard AC outlet.
ATTENTION
1.
Do not plug or unplug the power cable while you have wet hands.
2.
When not to use this unit for a long time, disconnect the power cable from the wall outlet.
3.
When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid
shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert 6 pieces
UM-2 "C" size batteries into the battery compartment with the correct battery polarity shown.
RADIO OPERATION
1.
Slide the
FUNCTION SWITCH
to
RADIO
position.
2.
Slide the
BAND SWITCH
to
AM
or
FM
position.
3.
Turn the
TUNING CONTROL
to your desired radio station.
4.
Adjust the sound level by rotating the
VOLUME CONTROL
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit
has a built-in antenna, turn the whole unit for best reception.
CD/MP3/USB OPERATION
Playing Audio CDs/MP3 disc
1.
Set the
FUNCTION SWITCH
to
CD/USB
position.
2.
Press the
CD/USB
button to select
CD
mode, CD icon will appear on the LCD display.
3.
Insert a CD disc in the CD compartment and close the CD door, the unit will start reading the
disc, it will show the total number of tracks of the entire disc after reading.
4.
Press the
PLAY/PAUSE
button to start playing the disc.
5.
During playing, press the
PLAY/PAUSE
button to temporarily pause playing. To resume, press
the
PLAY/PAUSE
button again.
6.
For MP3 discs (which has got folders), press the
FOLDER UP
button to select the folder you
want to listen.
Playing MP3 files with USB
1.
Set the
FUNCTION SWITCH
to
CD/USB
position.
2.
Press the
CD/USB
button to select the
USB
mode, USB will appear on the LCD display.
3.
Plug your USB device into the USB port on the unit, the unit will start reading the files in the USB
device, it will show the total number of tracks of the device after reading.
4.
Press the
PLAY/PAUSE
button to start playing the MP3 files.
5.
Press the
FOLDER UP
button to select the folder you want to listen.
6.
During playing, press the
PLAY/PAUSE
button to temporarily pause playing. To resume, press
the
PLAY/PAUSE
button again.
-3-
Skip Mode
1. During play or pause mode, press the
SKIP UP
button to go to the next track.
2. For MP3 files with folders, when the end of the folder is reached, press the
SKIP UP
button will
go to the first track of the next folder.
3. During play or pause mode, press the
SKIP DOWN
button to go back to the beginning of the
track.
4. During play mode, press the
SKIP DOWN
button twice will go back to the previous track.
5. For MP3 files with folders, when reaching the beginning of the folder, press the
SKIP DOWN
button will go to the last track of the previous folder.
Programming
In case of Playing Audio CD
The programming should be done during STOP mode
1. Press the
PROGRAM
button, the LCD display will show
P01
and flash.
2. Use the
SKIP UP
or
SKIP DOWN
button to select the desired track.
3. Press the
PROGRAM
button again to store the selected track in the memory, the LCD display
will show
P02
and flash continuously.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the
memory.
5. Press the
PLAY/PAUSE
button to start playing the disc in the programmed order.
6. To stop playing, press the
STOP
button.
7. To cancel the programming list, press the
STOP
button and open the CD compartment door or
select a different function
OFF/AUX
or
RADIO
.
In case of Playing MP3
All procedure is same as Audio CD. But if you have directory in your disc, you can select
folder/album and track both.
MP3/AUX IN CONNECTION
1.
Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out
jack or phones jack on your MP3 player and the other side to the aux-in jack on the unit.
2.
Turn on the unit and slide the
FUNCTION SWITCH
to
OFF/AUX
position.
3.
Turn on your MP3 player and follow the playback instruction.
4.
To stop this function, simply turned off your MP3 player.
Note:
Because of non-standardized format definition/production of MP3 format, playback quality &
performance are not guaranteed.
Manufacturer is not responsible for the playability of MP3 in any case due to recording conditions
such as PC performance, writing software, media ability and etc.
-4-
