Recording From Radio
1.
Set the Function Switch to
RADIO
position.
2.
Tune to desired radio program as described in the ‘Radio Operation’ section.
3.
Insert a blank cassette tape into the Cassette Compartment.
4.
Press the Record button and the Play button simultaneously to start recording. With the
built-in Automatic Level Control (ALC), the best recording quality is automatically adjusted.
Changing the volume level will not affect the recording.
5.
To stop recording, press the Stop button.
6.
When the tape runs to its end, the cassette operation will be stopped automatically.
Recording From CD/MP3 Player
1.
Slide the Function Switch to
CD/USB
position.
2.
Press the CD/USB button to select CD mode.
3.
Put a CD or MP3 disc into the CD compartment with the label on top.
4.
Insert a blank cassette tape into the Cassette compartment.
5.
Press the Record button and the Play button simultaneously to start recording. With the
built-in Automatic Level Control (ALC), the best recording quality is automatically adjusted.
Changing the volume level will not affect the recording.
6.
Activate the CD player, playing in a desired track as described in the ‘CD/MP3/USB
Operation’ section.
7.
To stop recording, press the Stop button of the cassette deck.
8.
When the tape runs to its end, the cassette operation will be stopped automatically.
Recording From USB Storage Device
1.
Slide the Function Switch to
CD/USB
position.
2.
Press the CD/USB button to select USB mode.
3.
Plug your USB device into the USB port on the unit, the unit will start reading the files in the
USB device, it will show the total number of tracks of the device after reading.
4.
Insert a blank cassette tape into the Cassette compartment.
5.
Press the Record button and the Play button simultaneously to start recording. With the
built-in Automatic Level Control (ALC), the best recording quality is automatically adjusted.
Changing the volume level will not affect the recording.
6.
Activate the USB device, playing in a desired track as described in the ‘CD/MP3/USB
Operation’ section.
7.
To stop recording, press the Stop button of the cassette deck.
8.
When the tape runs to its end, the cassette operation will be stopped automatically.
STEREO HEADPHONE JACK
For private listening, insert the plug of a stereo headphone into the Stereo Headphone Jack and
adjust the Volume Control Knob accordingly. During the use of a headphone, the speakers are
automatically disconnected.
MP3/AUX IN CONNECTION
1.
Insert the audio cable (requires 3.5mm stereo plug, not supplied) into the Line Out Jack or
Phones Jack on your MP3 Player into the corresponding AUX Input Jack on your main unit;
2.
Turn on your main unit and slide the Function Selector to AUX position;
3.
Make sure your AUX in component is turned on, and follow your component’s instruction;
4.
To stop this function, simply slide the Function Selector to Tape position.
Note:
Because of non-standardized format definition/production of MP3 format, playback quality &
performance are not guaranteed.
Manufacturer is not responsible for the playability of MP3 in any case due to recording conditions
such as PC performance, writing software, media ability and etc.
- 6 -
REMOTE CONTROL
Open the Battery compartment door and insert two pieces "AA" size batteries into the battery
compartment with battery polarity as shown inside the battery compartment.
Point the remote control at the remote sensor. The functions of the buttons on the remote control
are same as the corresponding controls on the main unit.
1 STOP
Button
2 CD/USB Button
3 PLAY/PAUSE
Button
4 FOLDER
+
Button
5 PROG
Button
6 SKIP
UP
Button
7 FOLDER
−
Button
8 MODE Button
9 SKIP
DN
Button
Warning:
When the remote will not be used for a long time, remove the batteries in order to prevent damage
due to electrolyte leakage.
CARE AND MAINTENANCE
Precautions
Always turn off the unit after use.
Keep the unit away from magnetic objects, water or heat sources.
Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never use
chemical cleaners that could damage the finish of the unit.
Never touch the CD pickup and lens. If fingerprints get on the pickup lens, clean it gently with
a commercial lens cleaner.
Disconnect the unit from any power sources before cleaning.
To remove a disc from its storage case, press down on the centre of the case and lift the disc
out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft
cloth. Unlike conventional records, compact discs have no grooves to collect dust and
microscopic debris so gently wiping with a soft cloth should remove most particles. Wipe in a
straight line from the inside to the outside of the disc. Small dust particles and light stains will
have absolutely no effect on reproduction quality.
SPECIFICATIONS
Frequency Range:
AM 520 - 1710 KHz
FM
87.5
-
108
MHz
Power Supply:
AC 120V ~ 60 Hz
DC 12V
(UM-1 x 8)
Specifications are subject to change without further notice.
- 7 -