BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Door and insert 6 pieces UM-2 "C" size
batteries into the battery compartment with battery polarity as shown inside the battery compartment.
RADIO OPERATION
Press
POWER / SOURCE
button to select the radio mode. It will show the radio frequency on the
LCD display (FM radio: 87.5 – 108 MHz and AM radio: 520-1710 kHz)
MANUAL STATION SELECTION
1.
Press the
TUNE UP
or
TUNE DOWN
button step by step to tune to the desired radio stations
2.
Press
or
VOLUME –
Button for the desired volume level;
3.
SEARCH STATION OPERATION
1.
Press and hold the
TUNE UP
or
TUNE DOWN
button for approx. 1 second, it will start to search the
next radio station in the direction of the search.
2.
The search operation simply finds stations with strong signals. Stations with weak reception can
only be tuned in manually.
3.
Press
or
VOLUME –
Button for the desired volume level;
AM: This unit has a build in ferrite rod antenna, which provides adequate reception in most areas.
If reception is weak, turn the unit to improve reception.
FM: If FM reception is weak, adjust the length and the angle of the FM antenna.
MEMORIZE RADIO STATIONS
1.
Tune to the desired station.
2.
Press
MODE/MEMORY/PROGRAM
button, The “PROG” will flash in the left bottom and LCD
display will show ‘ PXX ‘ (XX indicates the preset memory).
3.
Use
SKIP UP
or
SKIP DOWN
button to cycle through the preset stations 1-10
4.
Press
MODE/MEMORY/PROGRAM
to store the radio station in the memory.
5.
Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 10 radio stations
in the memory.
TO SELECT THE RADIO STATION IN THE MEMORY
Press
M+ / STOP
button for the radio station memory and press the
M+ / STOP
button skip up to the
next memory station.
CD FUNCTION
To play a CD, please follow the steps underneath:
1.
Press
POWER / SOURCE
button and select the CD mode.
2.
Open the CD door, Insert the CD with the printed side facing up and close the CD door;
3.
Disc information (total number of tracks) will appear on the LCD display and press
PLAY/PAUSE
button to play the CD.
4.
Press
or
VOLUME –
Button for the desired volume level;
5.
Press
STOP
button to stop playing the CD.
Skip Mode
1. During play or pause mode, press the
SKIP UP
button to go to the next track.
2. During play or pause mode, press the
SKIP DOWN
button to go back to the beginning of the
track. During play mode, press the
SKIP DOWN
button twice will go back to the previous track.
-3-
Programming the CD Player
The programming of the CD player should be done during STOP mode.
1.
Press
MODE/MEMORY/PROGRAM
button, The “PROG” will flash in the left bottom and LCD
display will show ‘ PXX ‘ (XX indicates the preset number of track to be programmed).
2.
Press the
SKIP UP
or
SKIP DOWN
buttons to select the desired track.
Press the
PROGRAM
button again to store this track in memory.
3.
Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in the
memory.
4.
Press the
PLAY/PAUSE
button to play the disc in the programmed order.
5.
To stop playing, press the
STOP
button.
6.
To cancel the programming list, press the
STOP
button and open the CD door or press
POWER/SOURCE
button.
Repeat Function
Repeat 1: Press
MODE/MEMORY/PROGRAM
button while playing the song. The REPEAT symbol
"
" will show on the LCD display.
Repeat all: Press
MODE/MEMORY/PROGRAM
button twice while playing the song. The REPEAT
symbol "
" will show on the LCD display.
To Cancel Repeat Function: Press
MODE/MEMORY/PROGRAM
button while playing the song three
times. The REPEAT indicator will be cleared from the display.
AUX IN CONNECTION
1.
Press
POWER / SOURCE
button and select the Aux-in mode. The display will show “
AUX
”.
1.
Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out
jack or phones jack on your audio device and the other side to the aux-in jack on the unit.
2.
Turn on your audio device and follow the playback instruction.
3.
To stop this function, simply turned off your audio device.
BLUETOOTH STREAMING
1.
Press
POWER / SOURCE
button and select the bluetooth mode. The LCD display will show
“bt”
and flash.
2.
Turn on your Bluetooth of your Bluetooth device and search the boombox for connection. Your
Bluetooth device should find
“HX-310CD”.
3.
If the connection is successful,
‘bt
’ will stop flashing.
4.
Select and play the audio files though your Bluetooth device.
5.
To stop this function, switch to other mode or shut down your Bluetooth of your Bluetooth device
AUTO PAIRING
Once the unit paired with the Bluetooth device, it will automatically pair with that device next time
when you turn on the unit and that Bluetooth device.
SPECIFICATIONS
Frequency Range:
AM 520 - 1710 KHz
FM 87.5 - 108 MHz
Power Supply:
AC 120V ~ 60Hz
Battery:
6 pcs. “C‘’ size ( 6 X 1.5V )
Specifications are subject to change without further notice.
-4-
