SETTING THE CLOCK
1. Make sure the unit in
CLOCK
mode (LED Display shows the time only
)
2. Press and hold the
ON/ PRESETS
button for about 1 second, the time will begin to flash.
3. Press the
TUN-/ HOUR
button to adjust the hour.
4. Press the
TUN +/ MIN
button to adjust the minute.
5. When the correct time is selected, press the
ON/ PRESETS
button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press and hold the
OFF/ AL 1 / VOL -AL 1
button (for Alarm 1) or
AL 2 /
VOL +
(for Alarm 2) button. The ALARM time will begin to flash on the display.
2. Press the
/ HOUR
button to adjust the alarm hour.
3. Press the
/ MIN
button to adjust the alarm minute.
4. When the desired alarm time is selected, press the
OFF/ AL 1 / VOL -AL 1
button (for Alarm 1) or
AL 2 /
VOL +
(for Alarm 2) button.
5. Press the
OFF/ AL 1 / VOL -AL 1
button (for Alarm 1) or
AL 2 / VOL +
(for Alarm 2) button to select the
ALARM sound mode -
buzzer
or currently set
radio
station. The alarm buzzer or radio indicator will light up.
The alarm indicator will show the alarm status as below :
AL1-B
indicator is on – Alarm 1 wake up mode is buzzer
AL1-R
indicator is on – Alarm 1 wake up mode is FM radio
AL2-B
indicator is on – Alarm 2 wake up mode is buzzer
AL2-R
indicator is on – Alarm 2 wake up mode is FM radio
Note :
If you choose AL1-R or AL2-R as the alarm wake up source, alarm
will go to the last FM radio station that you listened.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9
minutes by pressing the
SNOOZE/SLEEP/DIMMER
button once.
2. The alarm will then automatically activate again after the 9 minutes SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM
When the Alarm activate, press the
OFF/ AL 1 / VOL -
button to turn off the Alarm.
CANCEL ALARM SETTING
Press the
OFF/ AL 1 / VOL -AL 1
button (for Alarm 1) or
AL 2 / VOL +
(for Alarm 2) button repeatedly until all
alarm indicators go off.
DIMMER FUNCTION
In Clock Mode, press the
SLEEP/SNOOZE/DIMMER
button repeatedly to select the brightness of the display
LISTENING TO THE FM RADIO
1. Press and hold the
ON/ PRESETS
button to turn on FM radio. The display shows the radio frequency.
2.
AUTO TUNNING:
Press and hold the
TUN- / HOUR or TUN+ / MIN
button for approx.1 second, it will start
to search the next radio station in the direction of the search. The search operation simply finds stations
with strong signals. Stations with weak reception can only be tuned in manually.
3.
MANUAL TUNING:
Press the
TUN- / HOUR or TUN+ / MIN
button step by step to tune to the desired radio
stations manually..
4. For better reception
,
Fully extend the FM antenna.
5. To turn off the radio, press and hold the
OFF/ AL 1 / VOL -
button.
-3-
SAVING A RADIO STATION TO THE MEMORY
1. In Radio mode, tune to the desired FM station.
2. Press and hold the
ON/ PRESETS
button to store this radio station in the next memory station
number. The LED display will show
PXX
(XX is the memory station number from 01 to 10) and flash.
3. Press
TUN- / HOUR or TUN+ / MIN
button to select the number of memory station number.
4. Press
ON/ PRESETS
button to confirm.
5. Up to 10 FM radio stations can be stored in the memory.
TO LISTEN TO A SAVED RADIO STATION
In Radio model, press the
ON/PRESETS
button to skip to the next stored radio station.
SLEEP TO MUSIC FUNCTION
1. This function allows you to listen to the radio/Bluetooth/USB while you fall asleep.
2. In radio mode, press the
SNOOZE/SLEEP/DIMMER
button, the display will show the default sleep
time of 90 minutes.
3. Press the
SNOOZE/SLEEP/DIMMER
button repeatedly to set the desired sleep time.
(90-80-70-60-50-40-30-20-10 min. or OFF)
4. After the pre-set time has elapsed, the radio will turn off automatically.
CHARGE YOUR DEVICES/PHONES
1. CHARGE WITH USB PORT
(2.4A)
Connect the standard size end of a USB cable (not included) to the USB port at the back of the unit and
connect the other end to the charging port of your device.
The unit contains one USB port with
5V ~ 2.4A
charging.
Remarks:
Some devices may not support USB charging or may require a higher power rating than this
product provides. Observe the charging status on your device. Ensure your device is working properly
before attempting to charge. Charging function may not be supported for all phones or electronic
devices
2. Qi WIRELESS CHARGING
Place a Qi supported smartphone on the Qi Wireless Charging Pad. .
Check the charging icon displayed on the phone’s screen for the charging status.
While charging, the Qi indicator will keep flashing slowly. (Android Phones and Apple Phones)
Fully charged: the Qi indicator will remain on for some specific Android phones. For other
smartphones, the Qi indicator will keep flashing slowly.
Improper charging error**: the Qi indicator will keep flashing rapidly. (Android Phones and Apple
Phones)
The wireless charger is compatible with Wireless Power Consortium (WPC) certified devices.
Note **:
Do not place foreign materials, such as metal objects, magnets and magnetic stripe card between
the mobile device and the wireless charger. The mobile device may not charge properly or may be
damaged due to overheating.
Wireless charging may not work properly if you have attached a thick case to your mobile device. If
your case is thick, remove it before placing your mobile device on the wireless charger.
If the mobile device is not placed properly on the charging surface, or depending on the location of
the mobile device’s wireless charging coil, your mobile device may not charge properly.
When the mobile device is fully charged, remove it from the wireless charger.
-4-
