USB MP3 PLAYBACK
1.
Press
STANDBY
Button to turn on the Function mode
.
2.
Press the
FUNC.
Button to select
USB
mode. The display will show “
USb
”.
3.
Plug your USB device into the USB port on the unit, the unit will start reading the files in the USB device
and play automatically.
**Please be reminded to connect your USB device to the correct USB slot.
4.
Press the
/ FM SCAN/ BT UNPAIR
Button to temporarily pause playing. To resume, press the
/
FM SCAN/ BT UNPAIR
Button again.
5.
Press
TIME/M+/+10
Button to skip 10 songs.
6.
Press
VOL+
Button to increase the volume. Press
VOL-
Button decrease the volume.
7.
To turn off the USB playback, press
STANDBY
Button to return to STANDBY mode.
Note: In USB mode, the USB port for playback can only play MP3 files. It cannot charge any smart
device.
SLEEP TO MUSIC FUNCTION
1. This function allows you to listen to the function modes (
radio/Bluetooth/USB/Aux)
while you fall asleep.
2. Press the
SLEEP/TEMP.
Button, the display will show the default sleep time of 90 minutes.
3. Press the
SLEEP/TEMP.
Button repeatedly to set the desired sleep time. (The options are :
90-80-70-60-50-40-30-20-10 min. or OFF)
4. After the pre-set time has elapsed, the unit will turn off and switch to
STANDBY
mode automatically.
CHARGE YOUR DEVICES/PHONES
1. CHARGE WITH USB PORTS
Connect the standard size end of a USB cable (not included) to the USB charging port on the unit and connect
the other end to the charging port of your mobile phone or USB device,.
The unit contains two USB ports with 5V ~ 1A charging (each port).
Note:
i) Some devices may not support USB charging or may require a higher power rating than this product
provides. Observe the charging status on your device. Ensure your device is working properly before
attempting to charge. Charging function may not be supported for all phones or electronic devices
ii) In USB mode, the USB port for playback can only play MP3 files. It cannot charge any smart device.
-7-
2. WIRELESS CHARGING
Place a supported mobile device on the phone support.
Check the charging icon displayed on the mobile device’s screen for the charging status.
While charging, the Qi indicator will be
RED
.
(Andriod Phones and Apple Phones)
Fully charged: the Qi indicator will be
WHITE
for some specific
Andriod phones.
For Other smart phones, the Qi indicator will stay
RED
.
Improper charging error**: the Qi indicator will keep
FLASHING
.
(Android Phones and Apple Phones)
The wireless charger is compatible with Wireless Power Consortium (WPC) certified devices.
**Note:
Do not place foreign materials, such as metal objects, magnets and magnetic stripe card between the
mobile device and the wireless charger. The mobile device may not charge properly or may be damaged
due to overheating.
Wireless charging may not work properly if you have attached a thick case to your mobile device. If your
case is thick, remove it before placing your mobile device on the wireless charger.
If the mobile device is not placed properly on the charging surface, or depending on the location of the
mobile device’s wireless charging coil, your mobile device may not charge properly.
When the mobile device is fully charged, remove it from the wireless charger.
DIMMER
Press the
DIMMER/SNOOZE
Button to adjust the brightness of the
display. There will be 7 levels of brightness.
TEMPERATURE
In
STANDBY
mode, press and hold the
SLEEP/TEMP.
Button to
select
Degree Celsius (C)
or
Fahrenheit (F)
.
NIGHT LIGHT
In
STANDBY
mode, press
SKIP+/TU+/LIGHT+
Button to increase
brightness of Night Light. Press
SKIP-/TU-/LIGHT-
Button to
decrease to the brightness of Night Light.
-8-
