CONNECTING THE UNIT TO POWER
Plug AC power adapter to the AC wall outlet. Before switching on the unit, make sure that
the voltage of your electricity supply is the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 batteries into the battery compartment. Be sure to observe the
proper polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings,
the stored radio stations are preserved in the memory of the unit by means of battery
back-up function.
USB CHARGING (1A)
Connect the USB cable to your device and the clock’s USB port. The unit will charge your
device, such as smartphones or tablets.
DIMMER CONTROL
Press and Hold the
DIMMER
button to select the brightness of the LED display
NIGHT LIGHT
Press
LIGHT
button to turn on the night light. Press repeatedly to select the desired
brightness of night light.
SETTING THE CLOCK
1. Make sure the unit in CLOCK mode( Press
SOURCE / AL. OFF
button until the LED
display shows
“OFF”)
2. Press and hold the
CLK / MEM
button for about 1 second, the time will begin to flash.
3. Press the
HOUR
button to adjust the hour.
4. Press the
MIN
button to adjust the minute.
5. When the correct time is selected, press the
CLK / MEM
button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press and hold the
AL1
( for Alarm 1) or
AL2
(for Alarm 2)
button. The ALARM time will begin to flash on the display.
2. Press the
HOUR
button to adjust the alarm hour.
3. Press the
MIN
button to adjust the alarm minute.
4. When the desired alarm time is selected, press the
AL1
or
AL2
button to confirm.
5. Press the
AL1
or
AL2
button to select the ALARM sound mode -
buzzer
or currently set
radio
station. The alarm buzzer or radio indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a
short period of 9 minutes by pressing the
SNOOZE
button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE
period has ended.
3. This procedure can be repeated for up to approximately one hour.
-3-
TURN OFF THE ALARM
When the Alarm activate, press the
SOURCE / AL. OFF
button to turn off the Alarm.
LISTENING TO THE FM RADIO
1. Press the
SOURCE / AL. OFF
to select FM radio.
2.
AUTO TUNNING:
Press and hold the
SKIP DN/SKIP UP
button for approx.1 second, it
will start to search the next radio station in the direction of the search. The search
operation simply finds stations with strong signals. Stations with weak reception can only
be tuned in manually.
Note**: Fully extend the cable of the adaptor and try different position for better FM
reception. The adaptor cable acts as the FM antenna.
3.
MANUAL TUNING
: Press the
SKIP DN/SKIP UP
button step by step to tune to the
desired radio stations.
4. To turn off the radio, press the
SOURCE / AL. OFF
button. LED Display will show “
OFF
”
SAVING A RADIO STATION TO THE MEMORY
1. Tune the radio to the desired station.
2. Press and hold the
CLK / MEM
button to store this radio station in the next memory
station number. The display will show
PXX
(XX is the memory station number from 01 to
10)
3. Press
SKIP DN/SKIP UP
button to select the number of memory station number. Press
CLK / MEM
button to confirm.
4. Up to 20 FM radio stations can be stored in the memory.
TO LISTEN TO A SAVED RADIO STATION
1. Press the
SOURCE / AL. OFF
button to select FM radio.
2. Press the
CLK / MEM
button to skip to the next stored radio station.
SLEEP TO MUSIC FUNCTION
1. This function allows you to listen to the radio while you fall asleep.
2. In radio mode, press the
SLEEP
button, the display will show the default sleep time of 90
minutes.
3. Press
the
SLEEP
button
repeatedly
to
set
the
desired
sleep
time.
(90-80-70-60-50-40-30-20-10 min. or OFF)
4. After the pre-set time has elapsed, the radio will turn off automatically.
SPECIFICATIONS
Frequency Range:
FM: 87.5 - 108 MHz
Power Supply:
AC 100-240V ~ 50/60 Hz
Rated Output
DC5V
1.5A
Back-Up Battery:
2 pcs. UM4 “AAA” size (Battery not included)
USB Charging:
1A
Specifications are subject to change without prior notice.
-4-
