•
Set the speed of the Turntable in Vacuum mode:
In the program
„VACUUM“
you can now set the speed of the turntable in the program
„VACUUM“
. Until now it was only possible to set the speed of the turntable in the program
„LEFT“ „RIGHT“ „AUTOR.“
. Choose the program
„VACUUM“
the turbine is running.
Press the
„SPEED BUTTON“
and hold it for 3 seconds. The LED is blinking. Now you
can turn the
„SPEED BUTTON“
to adjust the speed of the turntable for the program
„VACUUM“
. If you turn the
„SPEED BUTTON“
into right the turntable runs faster, into
left to slow down the turntable. Now press and hold the
„SPEED BUTTON“
for 3 seconds
and the settings are saved. Now you are able to set the speed of the turbine.
•
Reset the machien to default settings on the Mera ELB Eco 24V DC new version:
If you don't find your favorite settings or have a wrong setting and don't know how to set it
back you can make a factory reset. To do this step you need to turn off the machine into
standby (push 1x
„POWER BUTTON“
). Push the
„SPEED BUTTON“
and hold it.
During holding the
„SPEED BUTTON“
press 1x short the
„POWER BUTTON“.
The
turnrable is twitching 1 time very short and the LED is blinking. Now release the
„SPEED
BUTTON“,
push it again and hold it another time for 3 seconds. The turntable twitch
another time and the machine goes into the standby mode.
Your machine is now on the default settings and you can use it how usual.
Bei Fragen und Problemen helfen wir ihnen gerne weiter, wenden Sie sich dazu an
oder rufen Sie uns unter 02191 / 84 29 76 an.
