manualshive.com logo in svg

Hanna HI 84502, Instruction Manual

Share
Download
Hanna HI 84502 Instruction Manual Download Page 35

35

VIEW/DELETE RECORDED pH DATA

To view or delete previously logged pH records press 

MENU

 then 

Recall

 to access the pH logs.

When an external USB storage device is connected the 

Export

 key is displayed. It saves the

meter and titrator logs in two text format files on the storage device.

Press 

Meter

 or 

Titrator

 to view the respective logs.

The instrument will display a list of all the records stored in the log.
If the saved mV/pH measurements are out of range the “

<

” or “

>

”

 

symbols are displayed in

front of the reading.

Use the 

ARROW 

keys to scroll the list of records.

Press 

Delete 

to delete the selected log from the memory.

Press 

Del.All 

to delete all the records.

Press 

Info 

to see detailed information about the highlighted record.

Use 

ARROW 

keys when   is displayed to scroll between the records.

Press 

ESC

 to return to the previous screen.

If 

Delete

 or 

Del.All 

is pressed the instrument will ask for confirmation.

Press 

Yes 

to delete the record or 

No 

to return to the previous screen without deleting.

Summary of Contents for HI 84502













































Reviews:

No comments

Brands by name

Popular brands

Load more brands