19
18
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment
in which it is used.
Operation of this instrument in residential area could cause unacceptable
interferences to radio and TV equipments, requiring the operator to take all necessary
steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade the
instrument's EMC performance.
To avoid electrical shock, do not use this instrument when voltages at the
measurement surface exceed 24VAC or 60VDC.
To avoid damages or burns, do not perform any measurement in microwave ovens.
WARRANTY
All Hanna Instruments
meters are warranted for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions. This
warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased
the instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair
is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization number from the Cus-
tomer Service department and then send it with shipping costs
prepaid. When shipping any instrument, make sure it is properly
packaged for complete protection.
Hanna Instruments reserves the right to modify the design, construc-
tion and appearance of its products without advance notice.
RS232 CONNECTION
To communicate with the instrument through the
HI92000
software,
simply use
HI920011
(optional) cable to connect the 9-pin serial port of
an IBM compatible computer and the 5 pin connector of the meter.
A connected meter will fully maintain its functionality, being able to perform
data transfer while the meter is operating.
Note
: RS232 communication is not allowed while calibrating the meter.
ACCESSORIES
HI 710005
12 Vdc / 115 Vac power adapter, US plug
HI 710006
12 Vdc / 230 Vac power adapter, European plug
HI 731318
Tissue for wiping the cuvets (4 pcs)
HI 731321
Glass cuvet (4 pcs)
HI 93703-0
0 FTU* AMCO-AEPA-1 calibration solution
(30 mL)
HI 93703-05
500 FTU* AMCO-AEPA-1 calibration solution
(30 mL)
HI 93703-10
10 FTU* AMCO-AEPA-1 calibration solution
(30 mL)
HI 93703-50
Cuvet cleaning solution (230 mL)
HI 92000
Windows
®
compatible software
HI 920011
PC connection serial cable (5 to 9-pin)
* 1 FTU = 1 NTU
