manualshive.com logo in svg

Hanna Instruments HI98494, Instruction Manual, Page: 24 / 72

Share
Download
Hanna Instruments HI98494 Instruction Manual Download Page 24

24

PARAMETER SETUP

7.  PARAMETER SETUP

From the measurement screen press 

Menu

. Use the arrow keys to highlight “Parameter Setup” and 

press 

Select

. Use the arrow keys to highlight the desired option and press 

Select

.

 

Note:

 Logged data saved on the meter will be changed to selected parameter units or coefficients.

7.1.  PARAMETER SELECTION 

Use the arrow keys to scroll through the list of available parameters. 
Press the corresponding functional key to enable or disable the highlighted parameters (or Enable / 
Disable all option). A checked box indicates that the parameter is enabled.

Note:

 When the password protection is enabled, authentication will be required before any 

parameter modification.

7.2.  PARAMETER UNITS

When selected parameters have a single measurement unit, the Parameter Units screen will not be 
displayed. If a parameter has been disabled the units will not be displayed.

Temperature Unit

Option: °C, °F, K

Press the functional key to select the desired temperature unit.

Summary of Contents for HI98494









































































Reviews:

No comments