manualshive.com logo in svg

Hanna Instruments HI97749, Instruction Manual, Page: 20 / 28

Share
Download
Hanna Instruments HI97749 Instruction Manual Download Page 20

20

METHOD PROCEDURE

8.  METHOD PROCEDURE

REQUIRED REAGENTS
Code Description 

Quantity

HI93749-0 

Chromium(VI) LR Reagent 

1 packet

REAGENT SETS

HI93749-01

 

Chromium(VI) LR Reagent - 100 tests

HI93749-03

 

Chromium(VI) LR Reagent - 300 tests

For other accessories see ACCESSORIES section.

MEASUREMENT PROCEDURE

Note: 

If tutorial mode is disabled follow the measurement procedure below. If the 

tutorial mode is enabled, press 

Measure

 and follow the messages on the screen.

• Fill the cuvette with 10 mL of unreacted sample 

(up to the mark). Replace the plastic stopper and 
the cap.

• Insert the cuvette into the holder and ensure that 

the notch on the cap is positioned securely in the 
groove.

• Press 

Zero

. The display will show “-0.0-” when the meter is zeroed and ready for 

measurement.

 

 

• Remove the cuvette.

• Add one packet of 

HI93749-0

 Chromium(VI) LR 

Reagent. Replace the plastic stopper and the cap. 
Shake vigorously for about 10 seconds.

10 mL

Summary of Contents for HI97749





























Reviews:

No comments