manualshive.com logo in svg

Hanna Instruments HI97717, Instruction Manual, Page: 20 / 28

Share
Download
Hanna Instruments HI97717 Instruction Manual Download Page 20

20

METHOD PROCEDURE

8.  METHOD PROCEDURE

REQUIRED REAGENTS
Code Description 

Quantity

HI93717A-0

 

Phosphate HR Reagent A 

10 drops

HI93717B-0 

Phosphate HR Reagent B 

1 packet

REAGENT SETS

HI93717-01

 

Phosphate HR Reagent - 100 tests

HI93717-03

 

Phosphate HR Reagent - 300 tests

For other accessories see ACCESSORIES section.

MEASUREMENT PROCEDURE

Note: 

If tutorial mode is disabled, follow the measurement procedure below. If the 

tutorial mode is enabled, press 

Measure

 and follow the messages on the screen.

• Fill the cuvette with 10 mL of unreacted sample (up 

to the mark). Replace the plastic stopper and the cap.

• Insert the cuvette into the holder and ensure that the 

notch on the cap is positioned securely in the groove. 

• Press 

Zero

. The display will show “-0.0-” when the meter is zeroed and ready for 

measurement.

 

 

• Remove the cuvette.
• Add 10 drops of 

HI93717A-0

 Phosphate HR 

Reagent A.

10 mL

×

10

Summary of Contents for HI97717





























Reviews:

No comments