Hanna Instruments HI97105 Instruction Manual Download Page 38

Abbreviations 38

ABBREVIATIONS

dKH

 

Degree of carbonate hardness

EDTA

 

Ethylenediaminetetraacetic Acid

EPA

 

US Environmental Protection Agency

HDPE

 

High Density Polyethylene

HR

 

High Range

LED

 

Light Emitting Diode

LR

 

Low Range

mg/L

 

Milligrams per liter (ppm)

NIST

 

National Institute of Standards 
and Technology

ppb

 

Parts per billion

ppm

 

Parts per million

RH

 

Relative humidity

RODI

 

Reverse Osmosis Deionized water

ULR

 

Ultra Low Range

μg/L

 

Micrograms per liter (ppb)

CERTIFICATION

All Hanna

®

 instruments conform to the 

CE European Directives 

and 

UK 

standards.

  

  

  

Disposal of Electrical & Electronic Equipment

. The product should not be treated as household waste. 

Instead, hand it over to the appropriate collection point for the recycling of electrical and electronic equipment, 

which will conserve natural resources.

Disposal of waste batteries.

 This product contains batteries, do not dispose of them with other household 

waste. Hand them over to the appropriate collection point for recycling.

Ensuring proper product and battery disposal prevents potential negative consequences for the environment 

and human health. For more information, contact your city, your local household waste disposal service, or 

the place of purchase.

RECOMMENDATIONS FOR USERS

Before using this product, make sure it is entirely suitable for your specific application and for the environment 

in which it is used. Any variation introduced by the user to the supplied equipment may degrade the meter’s 

performance. For your and the meter’s safety do not use or store the meter in hazardous environments.

WARRANTY

The 

Marine Master photometer

 is warrantied for two years against defects in workmanship and materials when 

used for its intended purpose and maintained according to instructions. This warranty is limited to repair or 

replacement free of charge. Damage due to accidents, misuse, tampering, or lack of prescribed maintenance 

is not covered.

If service is required, contact your local Hanna Instruments

®

 office. If under warranty, report the model number, 

date of purchase, serial number (engraved on the bottom of the meter), and the nature of the problem. If the 

repair is not covered by the warranty, you will be notified of the charges incurred. If the meter is to be returned 

to Hanna Instruments, first obtain a Returned Goods Authorization (RGA) number from the Technical Service 

department and then send it with shipping costs prepaid. When shipping any meter, make sure it is properly 

packed for complete protection.

Summary of Contents for HI97105









































Reviews: